SDI video inputs
8
Blackmagic ATEM Television Studio HD8
Blackmagic ATEM Television Studio HD8
The Blackmagic ATEM Television Studio HD8 is a compact switcher with an integrated control panel, providing a professional solution for live productions. It features eight 3G-SDI inputs with format conversion, internet streaming, main signal recording, and simultaneous source viewing. Additional features include digital visual effects, four chroma key overlay channels, media players, a communication system, a USB port for webcam use, a four-port Ethernet switch, and optional internal storage.
2.943,00 € VAT not included
SKU: SWATEMTVSTA/HD08
Available for booking
Purchase guaranteed by:
Secure payment
We guarantee secure payment with SSL
Free shipping
Free shipping to the Iberian Peninsula (Spain and Portugal) and the Balearic Islands for orders over €1000. For orders under €1,000, the shipping cost will be €15.
Free shipping within the European Union on orders over €1.000. For orders under €1,000, the charge will be €25.
Connections
SDI outputs
12
Transmission speeds
1.5G, 3G
HDMI video outputs
1
Total audio inputs
2 XLR connectors for balanced analog audio,
1 BNC connector for MADI digital audio (32 channels),
2 RCA connectors for analog stereo audio,
1 x 5-pin XLR connector for the communication system.
Total audio outputs
4 x 0.25" connectors for analog audio,
1 BNC connector for MADI digital audio (64 channels, up to 50 active).
1 x 5-pin XLR connector for the communication system.
SDI audio inputs
4 channels of audio integrated into all SDI inputs.
SDI audio outputs
2 integrated audio channels on all SDI outputs.
Timecode Connections
1 BNC input, 1 BNC output.
Input for reference signals
1 BNC input, 1 BNC output.
Tri-Sync or Black Burst.
Resynchronization of sources
In the 8 entries.
Format conversion and image frequency
In the 8 entries.
Auxiliary SDI outputs
2
Main SDI Outputs
1
Webcam output
2 x USB-C compatible with 720p or 1080p resolutions at the program frame rate.
Simultaneous viewing
1 x 3G SDI
1 x HDMI
Remote Control
RJ12 compatible with RS-422 connections
Connection for control panels
Ethernet. Direct connection between the panel and the mixer or via a network.
Internal timecode generator
Yes
Communication
RJ45 for third-party communication systems.
Pilot light outlet
Via Ethernet connection with the Blackmagic Design GPI and Tally Interface device. (Not included).
Ethernet
4 x RJ45 with network switch. Compatible with 10/100/1000 Base-T standards.
Computer interface
2 x USB-C for USB 3.0 connections. These allow the mixer to be detected as a webcam, updated and controlled via the included software, connected to other devices, and recorded to external storage devices.
No documentation available.
Related Products
