Blackmagic ATEM Camera Converter

SDI video input

1 x 10-bit SD/HD.

SDI video output

1 x 10-bit SD/HD.

HDMI video input

1 x HDMI with Type A connector.

HDMI video output

1 x HDMI with Type A connector.

Intercommunication

1 x 3.5 mm stereo for microphones.
1 x 3.5 mm stereo headphone jack.
Headphone connections compatible with iPhone phones.

Analog audio

2 x 0.25” TRS for stereo signals
balanced at the microphone level. When connected, it replaces the audio from the SDI or HDMI input.

Fiber optic video input

1 x SD/HD single-mode with LC connector.

Fiber optic video output

1 x SD/HD single-mode with LC connector.

Optical fiber audio input

4 x LC single-mode to receive audio
Channels 1 and 2 are for the program's audio. Channels 15 and 16 are used for communication with other team members.

Optical fiber audio output

4 x LC single-mode for transmitting audio
Channels 1 and 2 are for the program's audio. Channels 15 and 16 are used for communication with other team members.

Computer interface

1 x USB 2.0 Mini-B for configuration
Initial setup, firmware updates, and device control via the Converter Utility program.

Supported formats