Total SDI entries
9
Blackmagic 2110 IP Converter 8×12 SFP
Blackmagic 2110 IP Converter 8×12 SFP
This unit is designed to integrate 12G-SDI audiovisual transmission devices with SMPTE-2110 IP networks. It features eight independent channels capable of bidirectional signal conversion, equipped with SFP ports that allow for the integration of fiber optic modules to cover long distances. Its single-rack unit form factor includes a control panel with an LCD screen and is compatible with HD and UHD signals, achieving resolutions up to 2160p60.
2.279,00 € VAT not included
SKU: CONVNVIPC8/12GSFP
Available for booking
Purchase guaranteed by:
Secure payment
We guarantee secure payment with SSL
Free shipping
Free shipping to the Iberian Peninsula (Spain and Portugal) and the Balearic Islands for orders over €1000. For orders under €1,000, the shipping cost will be €15.
Free shipping within the European Union on orders over €1.000. For orders under €1,000, the charge will be €25.
Connections
SDI video inputs
8
Main SDI Inputs
1
Total SDI outputs
9
SDI outputs
8
Main SDI Outputs
1 derived output.
Transmission speeds
270 Mb/s, 1.5 Gb/s, 3 Gb/s, 6 Gb/s, 12 Gb/s.
SMPTE ST-2110 IP Inputs/Outputs (video)
8 x 10G Ethernet
Analog audio outputs
1 x 6.5mm Headphone Jack.
SDI audio inputs
16 integrated audio channels in the SDI input.
SDI audio outputs
16 integrated audio channels in the SDI derived output.
SMPTE ST-2110 IP Inputs (audio)
16 channels of audio integrated into the ST-2110 IP video signal via a 10G Ethernet connection.
SMPTE ST-2110 IP Outputs (audio)
16 channels of audio integrated into the ST-2110 IP video signal via a 10G Ethernet connection.
Analog audio outputs
1 x 6.5mm Headphone Jack.
Transfer speeds
Automatic detection of SD, HD, UHD and 4K signals.
Resynchronization
Yes
Ethernet
8 x SFP for 10 Gb/s fiber optic compatible with 10/100/1000/10G/100G BASE-T standards for receiving and sending SMPTE-2110 IP signals.
1 x 10 Gb/s RJ-45 compatible with 10/100/1000/10G BASE-T standards for setting up the device and updating the firmware.
Computer interface
1 x USB-C 3.0 for setting up the device and updating the firmware.
No documentation available.
