Blackmagic ATEM Television Studio HD8 ISO

SDI video inputs

8

SDI outputs

12

Transmission speeds

1.5G, 3G

HDMI video outputs

1

Total audio inputs

2 XLR connectors for balanced analog audio,

1 BNC connector for MADI digital audio (32 channels),

2 RCA connectors for analog stereo audio,

1 x 5-pin XLR connector for the communication system.

Total audio outputs

4 x 0.25" connectors for analog audio,

1 BNC connector for MADI digital audio (64 channels, up to 50 active),

1 x 5-pin XLR connector for the communication system.

SDI audio inputs

4 integrated audio channels on all SDI inputs.

SDI audio outputs

2 integrated audio channels on all SDI outputs.

Timecode Connections

1 BNC input, 1 BNC output.

Input for reference signals

1 BNC input, 1 BNC output.

Tri-Sync or Black Burst.

Resynchronization of sources

In the 8 entries.

Format conversion and image frequency

In the 8 entries.

Auxiliary SDI outputs

2

Main SDI Outputs

1

Webcam output

2 x USB-C compatible with 720p or 1080p resolutions at the program frame rate.

Simultaneous viewing

1 x SDI 3G

1 x HDMI

Remote Control

RJ12 compatible with RS-422 connections

Connection for control panels

Ethernet. Direct connection between the panel and the mixer or via a network.

Internal timecode generator

Yes

Communication

RJ45 for third-party communication systems.

Pilot light outlet

Via Ethernet connection with the Blackmagic Design GPI and Tally Interface device. (Not included).

Ethernet

4 x RJ45 with network switch. Compatible with 10/100/1000 Base-T standards.

Computer interface

2 x USB-C for USB 3.0 connections. These allow the mixer to be detected as a webcam, updated and controlled via the included software, connected to other devices, and recorded to external storage devices.